Audix VX10 Elite Condenser Vocal Microphone

Description

AUDIX VX10 ELITE CONDENSER VOCAL MICROPHONE

The VX10 condenser voice microphone was engineered to raise the bar for live sound and broadcast applications. The VX10’s frequency response is uniformly regulated from 40 Hz to 20 kHz, making it highly sensitive to transient response and capable of reproducing vocals and speech with excellent detail and realism.

The cardioid polar pattern of the VX10 aids in vocal isolation. This microphone has a 21 mm gold vapour capsule as well as a multi-stage internal pop filter. It’s also available in a low output version (VX10LO) for better control with strong stage levels or exceptionally powerful vocalists.

Aside from voices, the VX10 cardioid condenser microphone can pick up acoustic instruments including guitars, woodwinds, brasses, percussion toys, drum overheads, hi-hats, and pianos.

Designed, assembled, and tested by Audix in the USA.

In The Box

1x VX10 Vocal Microphone
1x Lined Wooden box
1x MC1 Microphone Clip
1x P1 Carrying pouch

Features

• Great for live and studio vocals, speech, acoustic instruments, on-air announcing, live broadcastsreproduces vocals and speech with exceptional detail and realism
• With a uniformly controlled frequency response from 40Hz-20kHz, the Audixvx10 is highly sensitive to transient response and reproduces vocals and speech with exceptional detail and realism
• The Audix VX10 mix has a cardioid polar pattern, which helps to isolate the vocals from the rest of the instruments on Stage
• Other features include a 21mm gold vapor Capsule and a multi-stage internal Pop filter
• The VX10 microphone handles sound pressure levels of 138 dB and provides over 20 dB of ambient noise rejection on live stages

Specification

Transducer Type: Condenser
Frequency Response: 40 Hz – 20 kHz
Polar Pattern: Cardioid
Output Impedance: 250 ohms
Sensitivity: VX10 – 24 mV / Pa @ 1k VX10LO – 4 mV / Pa @ 1k
Equivalent Noise Level: 19 dB (A-weighted)
Signal to Noise Ratio: 75 dB
Off Axis Rejection: >20 dB
Maximum SPL: ≥138 dB (w/ -10 pad)
Power Requirements: 48-52 V
Connector: 3-pin XLRm
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish: Zinc Alloy & Machined Brass / Black Finish
Weight: 310 g / 10.9 oz
Length: 180 mm / 7.1 in