BEHRINGER C-2 2 MATCHED STUDIO CONDENSER MICROPHONES
C-2 microphones are built to capture the performance of a choir, piano or any other vocal or acoustic sound source to provide a beautiful true-to-life sound. Sold in perfectly matched pairs, these outstanding C-2 mics are ideal for acoustic guitars and overhead drum studio and live sound applications.
What is a Condenser Mic?
Condenser microphones are the ideal choice for capturing vocals and acoustic instruments. They’re the primary type of microphone used in recording studios and radio stations. C-1 mics are capable of capturing much more detail than most dynamic microphones because of their wider, flatter frequency response. Another difference between condenser and dynamic mics is they contain active circuitry that requires phantom power (+48 V) for operation. You can power your C-1 using any phantom power equipped BEHRINGER XENYX mixer, plus enjoy the benefits of our state-of-the-art XENYX mic preamps.
Sound That Astounds
Once connected to your sound system, you’ll notice these twin pro-caliber microphones have exceptionally-flat frequency response (an average boost of 4 dB between 1 kHz- 8 kHz). For those of you new to condenser mics, this basically means you’ll get a slightly brighter sound, that will give the perfect shape to cymbals and overhead miking. Acoustic pianos and choirs will also benefit greatly from this frequency response. The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics (from 20 Hz to 20 kHz) and have a maximum sound pressure level of 150 dB. C-2 mics also feature a switchable low-frequency rolloff to eliminate infrasonics (mic handling and wind noise), as well as a switchable 10 dB input attenuation to accommodate for hot signals, such as a really loud vocalist – or overzealous cellist.
When it comes to capturing amazing sound, nothing in this class comes close to the C-2 for sonic accuracy, versatility and affordability! Pick up a pair of C-2s today at your authorized BEHRINGER dealer, or order online.
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world.
As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.
Gold-Plated Balanced XLR Connector
−41 dBV (0 dBV = 1 V/Pa)
20 Hz to 20 kHz
Level of Attenuation
−10 dB, switchable
Low Cut Filter
6 dB/oct. @ 120 Hz (switchable)
Max SPL (1% THD @ 1 kHz)
140 dB (0 dB), 150 dB (−10 dB)
Equivalent Noise Level
Signal To Noise Ratio
0 shaft: 0.8" / 20 mm
length: 3.7" / length: 94 mm
2 matched condenser microphones for stereo studio recording and live applications
Ideal as main and support microphones for studio and live applications
Cardioid pickup pattern for effective feedback elimination
Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
Switchable low-frequency roll-off and input attenuation
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Ultra-rugged construction with metal die-cast body
Gold-plated 3-pin XLR connector for highest signal integrity