Audix DP5A 5-Pieces Drum Microphone Kit
$ 757.09
- Description
- Reviews (0)
Description
AUDIX DP5A 5-PIECES DRUM MICROPHONE KIT
The DP5A professional drum microphone pack contains five microphones required to mic a standard rock kit: kick, snare, rack toms, and floor tom. Perfect for stage or studio, this selection of dynamic drum microphones features exclusive Audix VLMTM capsule technology offering accurate sound reproduction in very high SPL applications. Microphone clips, mounts, and a rugged aluminum carrying case are included.
A professional set of 5 drum microphones for stage or studio
Microphones work in tandem to replicate each drum accurately and independently
Easy to set up and position
CLOSE MIKING
The D6 for kick drum and the i5 for snare and toms are considered must haves for
every drummer. The kick and snare are considered the core of any drum kit and
the foundation for every groove. If either the kick or the snare is unable to be heard,
there is simply no groove and close miking insures that they will be captured in the
mix. Being high SPL dynamic microphones, the D6 and i5 excel at “close miking”. This
miking technique captures the attack and percussive sound of the drum. Also, by
having the mic close to the source of the sound, it helps to isolate and control the
sound of each drum. On toms the i5 provide a clear accurate signal and the cardiod
pattern allows you to use one mic between two rack toms if inputs are at a premium.
What’s In The Box:
1x D6(opens a new window) Kick Drum Microphone
1x i5(opens a new window) Snare Drum Microphone
2x D2(opens a new window) Rack Tom Microphones
1x D4(opens a new window) Floor Tom Microphone
4x DVICE(opens a new window) Rim Mounts
1x DCLIP(opens a new window) Microphone Clip
1x Aluminum Road Case
Specification
i5 | D6 | D4 | D2 | |
Transducer: | Dynamic VLM Type B | Dynamic VLM Type E | Dynamic VLM Type D | Dynamic VLM Type B |
Frequency Response: | 50 Hz – 16 kHz | 30 Hz – 15 kHz | 40 Hz – 18 kHz | 68 Hz – 18 kHz |
Polar Pattern: | Cardioid | Cardioid | Hypercardioid | Hypercardioid |
Output Impedance: | 150 ohms | 280 ohms | 280 ohms | 280 ohms |
Sensitivity: | 1.5 mV / Pa @ 1k | 8mV / Pa @ 80 Hz | 1.4 mV / Pa @ 1k | 1.2 mV / Pa @ 1k |
Maximum SPL: | ≥140 dB | ≥144 dB | ≥144 dB | ≥144 dB |
OFF-axis rejection: | ≥23 dB | ≥20 dB | >20 dB | >30 dB |
Power Requirements: | None | None | None | None |
Materials / Finish: | Die Cast Zinc Alloy/ Black E-coat | Machined Aluminum / Black E-coat | Black E-coat | Black E-coat |
Weight: | 250 g / 8.8 oz | 255 g / 9 oz | 128 g / 4.5 oz | 250 g / 8.8 oz |
Reviews
There are no reviews yet.