Manley Mid Frequency Tube EQ



SKU: MIDEQ Category:
By purchasing this product, you can earn points based on a percentage of cart total. You will come to know the total of MRH Reward Points information once you add the product to cart.
View cart
5% OFF
Valid for Wavebone Headquarter Series only.
Never expire
5% OFF
Valid For First Time Purchaser Only
Never expire




This single channel Mid Frequency EQ is the secret weapon for vocal, guitar, snare and all the other midrange instruments that are the meat of the mix.

Specially useful for midband oriented instruments such as guitars, vocals, harmonicas, and violins, the MID FREQUENCY ENHANCED PULTEC EQ (MEQ-5 type) shares the same features and specifications as our ‘EQP-1A’ version. The differences lie in the passive EQ section: In the MID EQ, the DIP and PEAK controls function on much sharper bell-shaped curves centered on the selected frequencies, which gives the engineer-producer more precise control over the vitally important midrange and makes this unit indispensable for mastering engineers. The MID EQ also completely fills the frequency gaps between the low frequency and high frequency sections of our Enhanced Pultec EQP-1A type EQ; thus the combination of the two provides a most flexible palette of possibilities for tracking or mastering.



  • MANLEY input transformer with pure nickel laminations potted in mu-metal case. 3K Ohm input Z
  • PHASE REVERSE switch for balanced XLR input
  • Alternate transformerless 1/4″ HI-Z (5K Ohm) input
  • BYPASS switch & AUTO-MUTE w/warmup delay
  • Silent conductive plastic PEAK & SHELF controls
  • Sealed gold-contact Greyhill frequency select switches
  • Hi-current drive <50 Ohm LO-Z XLR & 1/4″ outputs
  • Balanced Transformer Coupled XLR Outputs
  • Flat frequency response from 10Hz-70KHz
  • <0.01% THD @ 1kHz
  • S/N Ratio: 116 dB
  • Adjustable FEEDBACK / GAIN: Unity ±5 dB
  • Max. output: +30 dBv



Maximum Input (Bypass through Line Amplifier): +30 dBv
Maximum Output: +30 dBv
Headroom (referenced to +4 dBv): 26 dB
Frequency Response: 10 Hz to 70 kHz +/- 0.5 dB
THD & Noise (1kHz @ +4 dBm): .015%
Noise Floor (Gain set to minimum): -80 dB Wideband
Signal to Noise: 126 dB typical
Maximum Gain (via trim on back): 5 dB to -5 dB
Maximum EQ Boost: 12 dB low mids, 10 dB high mids
Maximum EQ Cut: 12 dB (10 db some freqs) (see curves)
Power Consumption: .35 Amps @ 115 VAC
Fuse: 1 Amp Slo-Blo
Size: (2U) 19″ x 1.75″ x 10″
Actual Weight: 10 Lbs
Shipping Weight: 13 Lbs


There are no reviews yet.

Be the first to review “Manley Mid Frequency Tube EQ”