Adam Audio A3X Professional Studio Monitor (Pair)
$ 553.06
- Description
- Reviews (0)
Description
ADAM AUDIO A3X PROFESSIONAL STUDIO MONITOR
Particularly interesting for the quality-conscious user on a tight budget is the most compact monitor of the AX-Series, the A3X. Specially designed for studio environments with limited space, the A3X easily meets professional requirements. Three-dimensional spatial representation, a controlled, deep bass response and accurate sound reproduction, especially in the critical areas between 200 and 400 Hz, make it the first choice for smaller, even mobile studio setups.
With the A3X, analytical listening is possible without taking away musical enjoyment. Its excellent transient response and ability to easily play very dynamic tracks in all musical genres let it clearly stand out from comparable monitors in this price range.
Stereolink
The ‘Stereolink’ is a useful feature for desktop DAWs. Two additional input and output jacks for the second stereo channel allow you to control the volume for both monitors using the volume control of only one loudspeaker. The volume control of the other monitor only affects its own volume in order to easily compensate for differences in listening distance. Unlike the typical master-slave configuration, each A3X monitor is fully equipped and can function either as a master or a slave unit.
Features
- A3X –the full featured compact monitor from the AX Series
- X-ART tweeter, handmade in Berlin
- The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane
- Lightweight glass fiber membrane of the woofers
- Vertical 2-way system with 4.5” woofer
- Linear frequency response of 60 Hz to 50 kHz
- Maximum peak sound pressure level per pair in 1 m ≥106 dB
- Tweeter-Gain-Controller
- Stereolink function (Cinch cable contained in the delivery contents)
- Analog XLR and RCA inputs
- Acoustically optimized cabinet geometry
- Directional sound radiation in vertical plane
- Volume control and on/off switch on the front
- Very compact cabinet dimensions
- Easily mounted on walls with original ADAM Audio wall mount (optional)
Specification
| Mid-Woofer | ||
| Number : | 1 | |
| Basket Ø : | 4.5″ (120 mm) | |
| Voice coil Ø : | 1″ (25 mm) | |
| Cone material : |
| |
| Tweeter | ||
| Number : | 1 | |
| Type : | X-ART | |
| Diaphragm area : | 4 inch² (2420 mm²) | |
| Equiv. Diaphragm Ø : | 2″ (56 mm) | |
| Velocity transform ratio : | 4:1 | |
| Diaphragm weight : | 0.17 g | |
| Built-in Amplifiers | ||
| Mid-Woofer : | 1 | |
| Type : | PWM | |
| Amp. power RMS / music : | 25 W / 40 W | |
| Tweeter : | 1 | |
| Type : | A/B | |
| Amp. power RMS / music : | 25 W / 40 W | |
| Control panel : | ||
| Input Sensitivity : | -∞ to +14 dB | |
| High Shelf EQ > 5 kHz : | ±6 dB | |
| Low Shelf EQ < 300 Hz | ±6 dB | |
| Tweeter gain : | ±4 dB | |
| Input connectors | ||
| Analog : | XLR / RCA | |
| General data | ||
| Frequency response : | 60 Hz – 50 kHz | |
| THD 90dB/1m > 100 Hz : | ≤0.8 % | |
| Max SPL with sine wave acoustic 100Hz to 3kHz at 1m : | ≥98 dB | |
| Max SPL per pair at 1m : | ≥106 dB | |
| Crossover frequencies : | 2800 Hz | |
| Stereolink | Yes | |
| Input impedance : | 30 KOhm | |
| Weight : | 10.1 lb (4,6 kg) | |
| Magnetically shielded : | No | |
| Height x Width x Depth : | 10″ (252 mm) x 6″ (150 mm) x 7.5″ (185 mm) | |
| Warranty : | 5 Years | |
| Delivery contents |
Cinch-cable, Power cord, Manual |
Reviews
There are no reviews yet.