KRK Rokit 10S 10″ Subwoofer


RM1,560.00(Approx. $ 326.51)

Availability: Out of stock SKU: 10S Category:
RM200.00 OFF
5% OFF
Valid for Wavebone Headquarter Series only.
Unlimited time
Apply Coupon
5% OFF
Valid For First Time Purchaser Only
Unlimited time
Apply Coupon





KRK’s KRK10s powered subwoofer is the perfect complement to KRK ROKIT, VXT, or any other 4″-8″ studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the ROKIT and VXT monitors. The front-firing bass port and KRK’s trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.

A New Standard in Low Frequency Monitoring.

For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again. Whether you are mixing in a 2.1 or 5.1 surround environment or just looking to upgrade the low-frequency extension of your existing monitors, the KRK10s will provide the low frequency detail and accuracy that will help you to create a better mix.

Don’t Be Square, Curves Ahead

Our new subwoofer series has radically curved surfaces for a great look and amazing performance. Finally there is a subwoofer that looks as cool as it sounds. You can even remove the grill to show off that beefy trademark yellow woofer.

Let’s Be Up Front

Take a look at competitive subwoofer monitors and you’ll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners over-amplifying low frequency information which in turn colors your mix. The superior design of the KRK10s includes front-firing ports which are just the right shape to reduce port turbulence. You’ll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.

Feel the Bass

You need to feel the bass and our proprietary signature yellow woofer delivers tight, clear low end response. Our engineers and listening panel took the KRK10s speaker voicing to even more accurate levels. What you hear is what you are intended to hear, coloration is not part of the spec. This performance is brought to you by drivers that are custom-designed by our world-class studio monitor engineering team, for a clear, low-distortion performance.

You’ve Got Connections

At KRK our focus is your mix. But it doesn’t stop at creating accurate monitors. We live this stuff and appreciate the need for monitors that not only sound great but work easily with your particular set up. That’s why you’ll find plenty of input options with your KRK10s, sure to accommodate any studio environment. So if it’s RCA, 1/4 inch (balanced/unbalanced) or XLR inputs you require, KRK10s has got you covered.

Take Control

With a sweepable 50Hz – 130Hz low pass filter, your KRK10s provides flexible control for any monitoring system. It’s true that we think your KRK10s sounds best using KRK full range monitors in a system configuration. However, the low pass filter provides great flexibility with any full-range monitor setup.

Use the Features Designed for the Pros

Professional engineers like the ability to hear how the sub is affecting the mix. Plug in any standard latching 1/4 inch footswitch to bypass the KRK10s and send full range audio to your top monitors. A ground lift feature helps tame pesky ground humm.

Bypass Footswitch control

Your KRK subwoofer is equipped with a bypass feature which allows you to defeat the sub and provide full range audio to your recording monitors. You will need to use a standard 1/4 inch, mono, latching footswitch. Any standard latching 1/4 inch mono footswitch (such as the Boss FS-5L) should be compatible.



ConfigurationFront loaded, vented subwoofer
System typeActive Subwoofer
Low-Frequency10″ Aramid Glass Composite woofer
Frequency Response34Hz – 50Hz to 130Hz Variable
Max Peak SPL113 dB
Amplifier ClassClass A-B
Power Output150 Watts Continuous @ 1% THD+N @ 100Hz
SNR (Signal to Noise Ratio)98dB
Amplifier Distortion (THD+N)≤ 0.1% @-3dB of Max Power Output 20Hz – 200Hz
Input Impedance (Ohms)10 K Ohm Balanced or unbalanced
HF Level Adjust-2dB, -1dB, 0, +1dB
Ground LiftOn / Off
Low Pass Frequency50Hz to 130Hz
HPF bypasswith footswitch only
Phase0 or 180 degrees
System Volume-30dB to +6dB
Input Connectors

Stereo RCA for left and right

Stereo balanced TRS for left and right

Stereo balanced XLR for left and right

LFE inputN/A
Output Connector

Stereo RCA for left and right

Stereo balanced XLR for left and right

AC Power InputSelectable 110V-120V / 220V-240V
Enclosure Construction15mm reinforced MDF
FinishBlack vinyl wrap
GrilleMetal Mesh
Port ConfigurationFront firing slot port
Dimensions (D x W x H)15″ (382mm) x 14″ (355mm) x 16.06″ (408mm)
Weight39 lbs (17.7 kg)




  • New curved design and custom color matches KRK ROKIT and VXT monitors
  • Protective Steel front Grill provides protection
  • Power LED provides visual indication of unit’s status
  • Bypass footswitch allows for checking mixes with and without subwoofer
  • Integrated crossover matches any main speaker system
  • Ground lift switch tames ground loops
  • Radically Curved Front Baffle Design for Amazing Performance
  • Front-firing port provides low frequency extension without boundary coupling
  • User’s manual provides clear setup instructions
  • Scientifically designed front firing port reduces wall coupling and port turbulence
  • Powerful bass reinforcement with KRK’s trademark yellow-cone glass-aramid woofer


There are no reviews yet.

Be the first to review “KRK Rokit 10S 10″ Subwoofer”